Gigabyte GN-A11G Manuel d'utilisateur télécharger pdf (Page 21)

GN-A11G Wireless LAN Access Point

 DHCP Mode

4 options are available: “Disabled”, “Client Enabled” , “Server Enabled” and

“Auto”. The default setting is Auto.

If you want to obtain IP addresses from a DHCP server, select “Client

Enabled”. To use an AP as a DHCP server and assign a dynamic IP

address automatically on the network, select “Server Enabled”. If you are

not sure DHCP server is available on the network and wish to use an AP as

DHCP server, please select “Auto”.

 DHCP Client Range & DNS

When “Server Enabled” is selected, please enter the range of your IP

addresses and DNS. DNS information is provided by your ISP.

 802.1d Spanning Tree

When the 802.1d Spanning Tree function is enabled, the circuit problem

among multi APs or routers in the network can be avoided. The default value

is “Disable”.

Confirm your desired settings and press “Apply” button to save the settings in

the AP.

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 56 57

Pas de commentaire

Gigabyte GN-A11G Manuel d'utilisateur Page 21