Gigabyte GA-MA78LMT-US2H Manuel d'utilisateur télécharger pdf (Page 47)

- 47 - BIOS Setup

Surround View

Enables or disables the Surround View function. This option is congurable only if Init Display First is

set to PEG and an ATI graphics card is installed. (Default: Disabled)

Onboard VGA output connect

Species the graphics display of the onboard VGA output from the D-SUB/DVI-D or D-SUB/HDMI.

Auto Lets the BIOS automatically determines the primary display port for output,

depending on to which port the display device is connected, D-SUB/DVI-D or

D-SUB/HDMI. (Default)

D-SUB/DVI Sets the D-SUB/DVI-D as the graphics display.

D-SUB/HDMI Sets the D-SUB/HDMI as the graphics display.

VGA Core Clock control

Enables or disables the control of VGA Core clock. (Default: Disabled)

VGA Core Clock(MHz)

Allows you to manually set the VGA Core clock. The adjustable range is from 200 MHz to 2000 MHz.

This item is congurable only if the VGA Core Clock control option is enabled.

AMD C1E Support

(Note)

Enables or disables the C1E CPU power-saving function in system halt state. When enabled, the CPU

core frequency and voltage will be reduced during system halt state to decrease power consumption.

(Default: Disabled)

Virtualization

Virtualization allows a platform to run multiple operating systems and applications in independent parti-

tions. With virtualization, one computer system can function as multiple virtual systems.

(Default: Disabled)

Patch AMD TLB Erratum

(Note)

Enables or disables the Patch AMD TLB Erratum function. (Default: Enabled)

AMD K8 Cool&Quiet control

Auto Lets the AMD Cool'n'Quiet driver dynamically adjust the CPU clock and VID to

reduce heat output from your computer and its power consumption. (Default)

Disabled Disables this function.

Hard Disk Boot Priority

Species the sequence of loading the operating system from the installed hard drives. Use the up or

down arrow key to select a hard drive, then press the plus key <+> (or <PageUp>) or the minus key <-> (or

<PageDown>) to move it up or down on the list. Press <Esc> to exit this menu when nished.

First/Second/Third Boot Device

Species the boot order from the available devices. Use the up or down arrow key to select a device

and press <Enter> to accept. Options are: Floppy, LS120, Hard Disk, CDROM, ZIP, USB-FDD, USB-ZIP,

USB-CDROM, USB-HDD, Legacy LAN, Disabled.

(Note) This item appears only if you install a CPU that supports this feature.

1 2 ... 42 43 44 45 46 47 48 49 50 51 52 ... 103 104

Pas de commentaire

Gigabyte GA-MA78LMT-US2H Manuel d'utilisateur Page 47