Gigabyte GA-J1800N-D2H (rev. 1.0) Manuel d'utilisateur télécharger pdf (Page 14)

- 14 -

8) F_PANEL (Front Panel Header)

Connect the power switch, reset switch, and system status indicator on the chassis to this header according

to the pin assignments below. Note the positive and negative pins before connecting the cables.

9) F_AUDIO (Front Panel Audio Header)

 ThefrontpanelaudioheadersupportsIntelHighDenitionaudio(HD)andAC'97audio.Youmayconnect

your chassis front panel audio module to this header. Make sure the wire assignments of the module

connector match the pin assignments of the motherboard header. Incorrect connection between the module

connector and the motherboard header will make the device unable to work or even damage it.

For HD Front Panel Audio: For AC'97 Front Panel Audio:

• The front panel audio header supports HD audio by default.

• Audio signals will be present on both of the front and back panel audio connections simultaneously.

• Some chassis provide a front panel audio module that has separated connectors on each wire

instead of a single plug. For information about connecting the front panel audio module that has

different wire assignments, please contact the chassis manufacturer.

Pin No. Denition

1 MIC2_L

2 GND

3 MIC2_R

4 -ACZ_DET

5 LINE2_R

6 GND

7 FAUDIO_JD

8 No Pin

9 LINE2_L

10 GND

Pin No. Denition

1 MIC

2 GND

3 MIC Power

4 NC

5 Line Out (R)

6 NC

7 NC

8 No Pin

9 Line Out (L)

10 NC

• PW (Power Switch, Red):

 Connectstothepowerswitchonthechassisfrontpanel.Youmaycongure

the way to turn off your system using the power switch (refer to Chapter

2, "BIOS Setup," "Chipset," for more information).

• HD (Hard Drive Activity LED, Blue):

Connects to the hard drive activity LED on the chassis front panel. The

LED is on when the hard drive is reading or writing data.

• RES (Reset Switch, Green):

Connects to the reset switch on the chassis front panel. Press the reset

switch to restart the computer if the computer freezes and fails to perform

a normal restart.

• NC (Purple): No connection.

• PLED (Power LED, Yellow):

System Status LED

S0 On

S3/S4/S5 Off

Connects to the power status indicator on the

chassis front panel. The LED is on when the

system is operating. The LED is off when the

system is in S3/S4 sleep state or powered

off (S5).

The front panel design may differ by chassis. A front panel module mainly consists of power

switch, reset switch, power LED, hard drive activity LED and etc. When connecting your chassis

front panel module to this header, make sure the wire assignments and the pin assignments are

matched correctly.

PLED-

PW-

PLED+

PW+

HD-

RES+

HD+

RES-

Power LED

Power Switch

Hard Drive

Activity LED

Reset Switch

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 31 32

Commentaires sur ces manuels

Pas de commentaire

Gigabyte GA-J1800N-D2H (rev. 1.0) Manuel d'utilisateur Page 14

Commentaires sur ces manuels

Produits connexes et manuels pour Cartes mères Gigabyte GA-J1800N-D2H (rev. 1.0)