Gigabyte GV-R557D5-1GI Manuel d'utilisateur télécharger pdf (Page 9)

- 9 - Hardware Installation

2.2. Hardware Installation

Now that you have prepared your computer, you are ready to install your graphics card.

Step 1.

Locate the PCI Express x16 slot. If necessary, remove the

metal cover from this slot; then align your graphics card with

the PCI Express x16 slot, and press it in firmly until the card is

fully seated.

Step 2.

Replace the screw to fasten the card in place, and replace the

computer cover.

Make sure that the gold edge connector of the graphics card is securely

inserted.

Step 3.

Plug the display cable into your card; then turn on the computer

and monitor. To connect a flat panel display to your graphics

card, use the DVI-I connector. To connect an HDMI monitor to

your graphics card, use the HDMI connector. To connect a

DisplayPort monitor to your graphics card, use the DisplayPort

connector.

You are now ready to proceed with the installation of the graphics card driver. Please refer to next

chapter for detailed instructions.

Connect a flat panel display

Connect an HDMI monitor

To Flat Panel Display

To HDMI Monitor

Connect a DisplayPort monitor

To D-Sub Monitor

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 31 32

Pas de commentaire

Gigabyte GV-R557D5-1GI Manuel d'utilisateur Page 9